The New Life International Water Purifier is easy to use and can be installed in many different configurations. The system can be adapted to utilize the local water sources and various water tank sizes or configurations that are needed for a given application. The New Life International Water Purifier makes water safe to drink. We also offer optional water filters to help clean the water of particulates, if needed. Solar panels and battery chargers are available to keep the battery charged.
BASIC WATER PURIFICATION KIT ONE TANK QUICK DISCONNECT SYSTEM
The basic kit includes everything needed to get the New Life International water purification system operational and make water safe to drink. The water purifier can be installed on various sizes of water tanks ranging from 100 liters to 10,000 liters. The typical purification cycle time to chlorinate the water ranges from a few minutes for 100 liters up to several hours for 10,000 liters depending upon the turbidity (clearness) of the water and the system configuration. The process requires another hour to allow the chlorine to disinfect the water. The chlorine level is then retested to determine if the water is safe to drink.
Note: The 12 volt battery and salt to operate the system will need to be purchased separately in-country. Likewise, existing on-site water tanks may be used on new tanks purchased locally near the installation site.
TWO TANK QUICK DISCONNECT SYSTEM
New Life International highly recommends a two tank, gravity fed system for the highest capacity usage such as disaster relief. While the water is being purified in the upper “Treatment Tank”, the lower “User Tank” can be dispensing safe water until it is empty. After bringing the chlorine level up to the required level and letting the water sit for the necessary contact time, the water in the Treatment Tank can then be transferred by gravity to the User Tank by opening a valve. The water in the User Tank can then be used immediately for drinking. Another batch of water can then be purified in the treatment tank while drawing water from the User Tank.
THE PURIFIER SYSTEM
1) Hose with male adapter Quick Connect fitting
2) Heat Exchanger
3) Sodium drain tubing
4) Chlorine drain Tube
5) Sodium Hydroxide Tube
6) The hub with electrical leads attached
7) The Chlorine Tube
8) Chlorine to Venturi tubing
9) Hose with the female coupler Quick Connect fitting
10) Large Venturi with test valves